Basic HTML Version
Torrington, CT 06790 • USA • TEL: 860-482-1532 • FAX 860-482-5059 • www.norse-inc.com © 2008
TYPE 2 LATCHES AND SLOT RECEIVERS
• VARIABLE ANGLE ATTACHMENT •
TORRINGTON, CT USA
TDS 94-7
V2-1106
CHANGING THE ANGLE BETWEEN PANELS JOINED TO A TUBE IS FACILITATED
BY WIDENING THE RECEIVER SLOTS IN THE TUBE AS SHOWN HERE
In the Typical Example Shown Here, Panels of 1.750”/44.5mm Thickness Are Being Joined At An Initial Angle Of 60° ,
With Some Angular Variation Required. A Tube Diameter Of 3.500”/88.9mm and a Slot Width Of 1.040”/26.4mm
Accommodates the Panels and Allows Angular Displacement Of Each Panel Of ± 10° .
Other Tube Diameters and Slot Widths Can Be Used.
*
Take Special Notice Of The Recess
Configuration Into Which The Norse Type
2 Case Fits; It Is A 2.375”/60.3mm
Radius Shaper Cut - Straight In And Out.
See TDS 82
MOUNTING
Widened Slot Receivers In The
Tube Allow The Angle Between
The Panels To Be Varied,
Commensurate With The Width
Of The Slot Cut In The Tube
MOUNTING DIMENSIONS
Type 2 Latches And Wide Slot Receivers
In This Illustration A Panel Thickness Of 1.750”/44.5mm And
An Initial Angle Of 60
o
Between Panels Is Shown. Any Panel
Thickness, Included Angle Or Required Angle Variations Can
Be Used. Obviously, These Factors Affect The Tubing Size
Required. Latch:
S1250-2-1.062
Section A - A
Fig. 2
Fig. 3A
Fig. 3C
¶ When Locking Latch, First Rotate It
Away From The Receiver Slot, Against
The ‘Cocking Rivet’ Until Rotation
Ceases. This Extends The Spring Hook,
Providing ‘Over-Reach’ For Locking
Fig.1
APPLICATIONS
Office Landscaping, Store Fixtures, Etc.
Can Be Fabricated With Panels And Tubing
In A Manner Accommodating Changes In
The Angle Between The Panels Joined