Page 92 - Norse Catalog

TORRINGTON, CT USA

TYPE 2S SMALL LATCH

W/NUT INSERTS & SLOT RECEIVER

Above, a Type 2S Small Latch in a metal case mounting uses a Slot Receiver.

• Aesthetics – Excellent • No Protrusions • Tamper Resistant • Sealed if Required •

Fig. 3

Internal view of mounting

AS SHOWN JOINING METAL COMPONENTS

Fig. 2

Case closed, handle optional

Fig. 1

Latch mounting & slot Receiver

MOUNTING DIMENSIONS THICK METAL CASE

Latch:

S1125-2S-1.000/6-32

The thickness of component ‘C’ allows counter sinking to

recess the screw head. This ‘build-up’ also is approx. .187";

again, a proper ‘Setback’ is 1.000".

MOUNTING DIMENSIONS THIN METAL CASE

Latch:

S1125-2S-1.000/6-32

The above illustrates how dimpling the hole in component

‘A’ to flush mount the screw head adds to the ‘build-up’, in

this case .187"; therefore, the proper ‘Setback’ is 1.000".

When using a slot as a Receiver, the ‘Reach’* of the S1125 Latch hook is 1.187"/30.2mm.

Where the ‘build-up’ of the components being joined is approximately .187"/4.8mm as is shown in these applications,

this dimension is subtracted from the ‘Reach’ to determine the ‘Setback’ of the Latch; i.e.: 1.187" – .187" = 1.000",

which is the ‘Setback.’ This results in a Latch part no.: S1125-2S-1.000.

To order factory installed nut inserts, add ‘/6-32’ to the part no.; i.e.: S1125-2S-1.000/6-32. Other applications using Slot Receivers

having different ‘build-ups’ necessitate selecting appropriate ‘Setbacks’ to maintain the Spring Hook ‘Reach’.

For additional information and dimensions on the Type 2S Small Latches see TDS 61-3A & 4A.

Fig. 5

TDS 72-1A

V2-1106

Fig. 4